Autel EVO 2 PRO Mapping LOVE IT;jwt_token=eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzUxMiJ9.eyJleHAiOjI1MzQwMjMwMDc5OSwiaWQiOiI1ZWU2NmY1MzE3YjJlNDYzYjQ5ZDFiZTciLCJzY29wZSI6WyIyNjJkYTkxNGEwX0M2QjJEMzdCRTBPUEVOUElQRUxJTkUiXSwidHlwZSI6IlJlYWRPbmx5UGxhbiIsIm92ZXJsYXlfZm9sZGVyX2lkIjoiNWVlNjZmMjkxN2IyZTQ2M2I0OWQxYmU1In0.YVrhqyvApPMq5Ys1bjcR24zgPPaGz71BYuHTnEXB8Ycd3wb9C6igkJiW1kf43ENyEXbbD8-zkphjNOEde391_w

Map Report. RMSE .07

1 Like

Wont let me upload map report, bummer

Cool! Is that the 6K model? And it’s just a little bigger than the Mavic 2 Pro?

YES< 6K PRO, Love it

1 Like

Yes bigger than mavic pro

1 Like

How did you get the autel evo 2 pro connected?

Connected? You dont have to fly your missions with the DD app. you can fly with any app and upload the data to DD

No Litchi, Pix4D or DroneDeploy… what did you end up with? It seems that you can do a manual waypoint mission? Like this I did in Litchi. I use to do this all the time before DroneDeploy has continuous mission flights.

Autel has their own Mission Planner.(in the app) To fly automated flight paths, with overlaps front and side


Here is anouther one, I did with EVO 2 PRO, for a client yesterday;jwt_token=eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzUxMiJ9.eyJleHAiOjI1MzQwMjMwMDc5OSwiaWQiOiI1ZWVkMTdiYWIzY2E3NGNmMmQ4NTBjMGUiLCJzY29wZSI6WyIzNGExODE1NWJlX0M2QjJEMzdCRTBPUEVOUElQRUxJTkUiXSwidHlwZSI6IlJlYWRPbmx5UGxhbiIsIm92ZXJsYXlfZm9sZGVyX2lkIjoiNWVlZDE3OGZiM2NhNzRjZjJkODUwYzBjIn0.sCz67lQqsi51p_-HyVJbHbJ0Z4GvLdW_toZ1G4fppnyWJqLA7wxp1TjQ8ay_-0wjZetBr1H-dwikcSPvWwpWvw

How do I upload a map report to show it is the EVO

Nice. Must be fairly new. Last time I looked they were basically Go4 with the ability to do waypoints and you had to calc.

Yeah, brand new mission planner, works great for mapping

1 Like

Going to look for some info now! Sounds like I need to save my drone fund budget for a few more months…

1 Like

This looks allot like Yuneec construction so possibly the parts are from the same manufacturer. A couple of quick questions…

Is this a vent or just a solid accent piece?

Could you measure the width of this area? The flattest part before it curves down too much.

Also, it says it is 100g heavier than the Mavic 2 Pro, but the diagonal wheelbase is 338mm which is 20mm shorter than the M2P? I thought it was bigger, or does it just look bigger.

1 Like

1 Like

It is quite a bit larger than the Mavic 2 pro. The part of measure you ask is 1.25" and the vent appears to be just a fake vent.

1 Like;jwt_token=eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzUxMiJ9.eyJleHAiOjI1MzQwMjMwMDc5OSwiaWQiOiI1ZWVlNmNhYzI3MmQzNzQzNGQ2YzY1MmEiLCJzY29wZSI6WyJhMjY2NDYzNTA2X0M2QjJEMzdCRTBPUEVOUElQRUxJTkUiXSwidHlwZSI6IlJlYWRPbmx5UGxhbiIsIm92ZXJsYXlfZm9sZGVyX2lkIjoiNWVlZTZjOGIyNzJkMzc0MzRkNmM2NTI5In0.fnOzoX9Mh-XqjQb4hWHc5aQdESGO1Gopqoi1gZt6YbuegqHDdgoW4cE0Aaov6XkvI4gW8hNTBQvhr3r954Jpsw

Map I did yesterday with the EVO 2 Pro, check out the 3D Model

1 Like

I guess it is confusing that the horizontal dimension may be about the same, but it definitely looks meaner and bigger up off the ground. It looks like it would be pretty easy to fashion a PPK GNSS setup for. Thanks!

1 Like