DJI Inspire1 suddenly hover at 65% progress flight

Flight - Discussion and Q&A
1

Hey guys,

Few weeks ago I was excecuting a flight plan with DD and the aircraft stoped hovering at 65% aprox. Reviewing the flight log, just found below events:

Date/Time (UTC) Elapsed Time (sec) Info
09/14/2019 16:35:34 0.128 Mission did take off
09/14/2019 16:45:17 583.455 Airlink Disconnected
09/14/2019 16:48:43 789.232 Battery Disconnected - Gimbal Disconnected - Remote Controller Disconnected - Camera Disconnected - Flight Controller Disconnected - Drone Disconnected - Remote Controller Connected - Airlink Connected - Drone Reconnected - Drone Connected - Battery Disconnected - Flight Controller Disconnected - Gimbal Disconnected - Remote Controller Connected - Camera Disconnected - Airlink Connected - Payload Disconnected
09/14/2019 16:49:17 823.531 Return Home
09/14/2019 16:49:55 861.530 Gimbal Connected - Camera Connected
09/14/2019 16:49:57 863.831 Battery Connected - Flight Controller Connected

Events
Events.jpg1259×311 103 KB

Any idea? RTH was performed by pilot through RTH button.

Thanks!

1 Like
2

What was your distance from home?

3

like 20 or 30 mt

Home
Home.jpg1287×729 250 KB

1 Like
4

Aircraft Smart Go-home Flight Time Remaining (sec) = 157

1 Like
5

Gotcha, just wanted to make sure that it was losing radio connection. I have seen pilots complain about this with distances as low as 300m and it turned out to be radio and/or GPS interference, but with that plan/landscape there shouldn’t be any issues.