Aircraft stopped (hovering) before completing two last mission segments

Summary of Issue:

Mission have completed up to 70% aprox when aircraft stopped suddenly and remain hovering, After that had to take manual control to take it back home.

Date Issue Began:

02 Sep 2018 one mission out of two.

Drone Model:

#Aircraft
Aircraft Model Inspire 1
Aircraft Name MantisJGR1
Aircraft Firmware 1.11.01.50

Mobile Device Model and OS version:

#Device
Device Model iPhone
Device User Interface Idiom iPhone 0
Device Operating System iOS 11.4.1
Device SSID

DroneDeploy App Version:

#DroneDeploy 2.79.0
#Flight Recorder
Session ID 5b8c202be29d7958203d3eb5
Session Start 09/02/2018 17:47:100:

*Log File

#DroneDeploy 2.79.0
#Flight Recorder
Session ID 5b8c202be29d7958203d3eb5
Session Start 09/02/2018 17:47:10
#Device
Device Model iPhone
Device User Interface Idiom iPhone 0
Device Operating System iOS 11.4.1
Device SSID
#Aircraft
Aircraft Model Inspire 1
Aircraft Name MantisJGR1
Aircraft Firmware 1.11.01.50
#Aircraft Battery
Full Charge Volume (mAh) 5301
Remaining Life (%) 95
Discharges 21
#Components
Battery Cells Number 6
Battery Serial Number 5381160903055
Battery Firmware 03.10.00.00
Flight Controller Serial Number
Flight Controller Firmware 02.04.20.50
Gimbal Firmware 01.30.01.43
Remote Control Serial Number 03LJC03804
Remote Control Firmware 1.7.80
Camera Serial Number

1 Like

Once you grabbed control back did you try resuming?

I didn’t @MichaelL I was just testing new modified NIR camera X3, so I didn’t think about that, but It was the first time it happened to me. My “When Disconnect” option is always back to home but kept hovering, then swtich from F to P and take it back to me. After that I’ve duplicated same flight plan and launched with a different battery and everything went fine.

1 Like